How to Deal With the Faucet If It Doesn’t Run water after Installed?

In the kitchen and bathroom, the use of faucetsis very frequent. In daily life, if the faucet does not run water, the impact on life is very large. Therefore, when you find that the faucet does not run water, you must learn to solve the problem in time. So what happens when the faucet is installed without running water? If you want to solve the problem, you must understand the nature of the problem.

What happens when the faucet is installed without running water?

Step 1: check whether the faucet handle and the valve core are off, which cause the faucet cannot switch. If this is the problem, just replace the valve core or the faucet.

Step 2: Check if the faucet angle valve is closed. If it is closed, just open it.

Step 3: If there is no problem in checking the above two steps, open the isolation net at the front of the faucet outlet and open it to see if there is any dirties clogged. If it is, clean the dirties.

Step 4: Check the main valve of the household water pipe. If there is no water after opening, it means that the water is stopped.

Faucet Installation Precautions:

When installing a new faucet, it is necessary to thoroughly clean all kinds of impurities in the pipeline, which can effectively avoid the problems of valve core damage, blockage and leakage. At the same time, the product with the screen cover for the water outlet should be removed and washed after a period of use, this can effectively clean up impurities and avoid blockage. When the faucet is not in use, be careful not to form a dead angle at the hose and valve body joints to avoid breakage and damage to the hose.