Views: 61 Author: Site Editor Publish Time: 2018-09-20 Origin: Site
Is it time for an update for your faucet? If it's just dripping, you can usually just replace a washer or other seal. Don't worry if you need to replace the whole thing though. The procedure is pretty straightforward, especially if you have the right tools.
Check out our guide on how to install a bathroom faucet. We’ll help you get through the process from start to finish without getting water all over the place.
Tools and Materials:
Eccentric Joint 2*
Rubber Washer 2*
Step 1 :Before installation faucet,please open water inlets and flush all the particles or dirt inside of water pipe to avoid faucet being blocket.Then close water inlets.
Put thread sealant on threads of eccentric joint.Connect eccentric joint 1/2’’ side to water pipe,adjust distance between water inlet pipes by eccentric jiont (Distance can be adjusted 150+/-20)
Step 2: Connect flange to eccentric joint 3/4’’ side. Put the flange against the wall. Then put the rubber washer inside the hexagon nut,connect the hexagon nut to eccentric joint 3/4’’ side.Keep the faucet body horizontal.(Notice:How water pipe on the left side ; code water on the right side)
Step 3: Connect the hose to valve body and shower, then put shower into shower holder.
Step 4: Open and check valve to affirm no water leakeage toward each joint part.If operates normally,it can be put into use